找回密码
 加入怎通
查看: 688|回复: 0

Injection molding machine

[复制链接]
lees 发表于 2013-03-13 16:24:14 | 显示全部楼层 |阅读模式
本帖最后由 lees 于 2013-3-13 16:25 编辑

njection molding machine is divided into 2 units i.e. a clamping unit and an injection unit.
The functions of the clamping unit are opening and closing a die, and the ejection of products. There are 2 types of clamping methods, namely the toggle type shown in the figure below and the straight-hydraulic type in which a mold is directly opened and closed with a hydraulic cylinder.
The functions of the injection unit are to melt plastic by heat and then to inject molten plastic into a mold.
The screw is rotated to melt plastic introduced from the hopper and to accumulate molten plastic in front of the screw ( to be called metering ) . After the required amount of molten plastic is accumulated, injection process is stared.
While molten plastic is flowing in a mold, the machine controls the moving speed of the screw, or injection speed. On the other hand, it controls dwell pressure after molten plastic fills out cavities.
The position of change from speed control to pressure control is set at the point where either screw position or injection pressure reaches a certain fixed value.

Plastic mouldPrecision mould  Connector Metal stamping manufacturer   http://www.shiyunjia.com/
回复

使用道具 举报

轮胎江湖风云榜:强者逐鹿,你选哪方?
轮胎江湖初起:排名那些事儿 在汽车的万千零部件中,轮胎虽低调,却承载着整车的重量,掌控着行驶的方向,还直接关乎驾乘的安全与舒适,是汽车与地面沟通的 “桥梁” 。就像武侠世界里各路英雄豪杰都有自己的看家本领和江湖地位一样,轮胎品牌也凭借各自独特的技术、性能和口碑,在市场中角逐出了属于

您需要登录后才可以回帖 登录 | 加入怎通

本版积分规则

QQ|网站地图|真牛站长论坛 ( 苏ICP备2023040716号-2 )

GMT+8, 2025-11-29 00:14

免责声明:本站信息来自互联网,本站不对其内容真实性负责,如有侵权等情况请联系420897364#qq.com(把#换成@)删除。

Powered by Discuz! X3.5

快速回复 返回顶部 返回列表